| Picture |
Heading |
Updated |
 |
Thermo-anemometer with High Sensitivity and Accuracy
Model Number: DT-318
Brand Name: CEM
Key Specifications/Special Features:
16-inch Gooseneck detector is easy to measure the hard-to-reach areasAir Velocity and Temperature measurements displayed on multi-functionFull 4-digit display of air vel... |
2017-10-24 |
 |
Professional AC, AC/DC Clamp Meter with Electronic Overload Protection
Model Number: DT-9800T
Brand Name: CEM
Key Specifications/Special Features:
Pocket and lightweight design, easy to use and carryTrue RMS measurementsElectronic overload protection4,000-count LCD displayContinuity buzzer and diode checkPeak hol... |
2017-10-20 |
 |
Infrared Thermometer with Laser Pointer and Low Battery Indication
Model Number: DT-882
Brand Name: CEM
Key Specifications/Special Features:
Unique flat surfaceMini modern housing designTemperature measurements range from -50 to 550 degrees Celsius or -58 to 1022 degrees Fahrenheit8:1 distance to spot size ra... |
2017-10-15 |
 |
Electrical Testers with AC/DC Voltage Detection Function and Flashlight
Model Number: DT-9020
Key Specifications/Special Features:
Clear indicatorsAC/DC voltage detection functionPolarity detectionLow impedance testFlashlightVoltage function and operates without batteryOvervoltage class:CAT III: 1,000VCATIV: 600VV... |
2017-10-06 |
 |
Mini Anemometer
Model Number: DT-82
Brand Name: CEM
Key Specifications/Special Features:
Specifications:Function: m/s (meter per second)Range: 0.40-25.00Accuracy: ±3.5%±0.2m/sFunction: ft/min (feet per minute)Range: 80-2980Accuracy: ±3.5%±40 ft/minFunction: k... |
2017-09-21 |
 |
Easy-to-use Thermo-Anemometer with Large LCD and K-type Sensor
Model Number: DT-618
Brand Name: CEM
Key Specifications/Special Features:
Features:Measurement of wind velocity and temperature, holding the reading and finding the Max./MinSensitive and accurate (ultra low friction jewel bearing)Ergonomic and... |
2017-09-18 |
 |
Professional Light Meter with Datalogger Function and USB Interface
Model Number: DT-8809A
Brand Name: CEM
Key Specifications/Special Features:
Precision instrument used to measure illuminance (lux, footcandle) in the fieldMeet CIE photopic spectral responseFully cosine corrected for the angular incidence of l... |
2017-09-17 |
 |
CFM/CMM Thermo-Anemometer with NTC-Type Thermo-Resistant Temperature Sensor
Model Number: DT-619
Brand Name: CEM
Key Specifications/Special Features:
Easy to set area dimensions (up to 8 points)20 points average; max./min. record for single point Continuous moving average for up to 2 hours Data hold and max./min. hold... |
2017-08-26 |
Friends links